TM 9-2350-267-10
STARTING MAIN ENGINE - Continued
2. Adjust driver’s seat as necessary.
l
l
l
l
Adjusting up and down. Hold seat
down and pull upon adjusting lever
(16). With lever raised, lift or press
seat to obtain correct height. Re-
lease adjusting lever to lock in posi-
tion.
Adjusting forward and backward.
Pull up on adjusting tab (17) and
move seat forward or backward.
Release adjusting tab to lock in po-
sition.
Backrest positioning. Press pawl
(18) and rotate backrest up and
back. When backrest is positioned
vertically, reposition pawl to lock
backrest.
Adjusting backrest height. Remove
adjusting pin (19) and lower or
raise backrest. When desired
height is obtained, install pin in ad-
justing holes.
2-80
