TM 9-2350-261-20-4
REPLACE APIU RACK MOUNT AND BRACKET (M1068 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
Equipment Condition
Unit
Engine stopped (see your -10)
Carrier blocked (see your -10)
Tools and Special Tools
All external power disconnected
(TM 11-7010-256-12&P)
Electronic communication equipment removed
Materials/Parts
(TM 11-7010-256-12&P)
Locknut (16)
Curbside data panel assembly A12 removed
Personnel Required
Battery ground lead disconnected (WP 0294 00)
Unit Mechanic
REMOVAL
1.
Remove four locknuts (1), screws (2), and receptacle (3) from bracket (4). Discard locknuts.
2.
Remove two screws (5), locknuts (6), four washers (7), clamp (8), and bracket (4) from APIU rack (9). Discard locknuts.
3.
Remove four screws (10), washers (11), locknuts (12), and mount (13) from APIU rack (9). Discard locknuts.
4.
Remove two locknuts (14), screws (15), spacers (16), washers (17), and hanger (18) from bulkhead mount (19) and
rack (9). Discard locknuts.
5.
Remove three locknuts (20), screws (21), six washers (22), and rack (9) from three bulkhead mounts (19). Discard
locknuts.