TM 9-2350-261-20-4
REPLACE APIU RACK MOUNT AND BRACKET (M1068 ONLY) -- Continued
0725 00
INSTALLATION
1.
Align spacer (1) and hanger (2) with bulkhead mount (3). Secure with screw (4), two washers (5), and new locknut (6).
2.
Align rack (7) with three bulkhead mounts (3). Secure with three screws (8), six washers (9), and new locknuts (10).
3.
Position spacer (1) between rack (7) and hanger (2). Secure with screw (4), two washers (5), and new locknut (6).
4.
Install mount (11) on the Adaptive Programmable Interface Unit (APIU) rack (7). Secure with four washers (12),
screws (13), and new locknuts (14).
5.
Install bracket (15) and clamp (16) on the Adaptive Programmable Interface Unit (APIU) rack (7). Secure with four
washers (17), two screws (18), and new locknuts (19).
6.
Install receptacle (20) on bracket (15). Secure with four screws (21) and new locknuts (22).