REPAIR BATTERY BOX (ALL EXCEPT M125A2 AND M106A2)
This task covers:
Remove (page 13-22).
Clean, Inspect, and Repair (page 13-23).
Install (page 13-23 ).
General Mechanics Tool Kit (Item 30, App D)
Socket Wrench Set (Item 89, App D)
Torque Wrench (Item 94, App D)
Epoxy coating kit (Item 15, App C)
Sodium bicarbonate (Item 55, App C)
Self-locking nut (3)
Self-locking nut (4)
See your -10
Engine stopped/shutdown (see your - 10)
Battery box cover and leads removed (page
Batteries and retainers removed (page 13-16 )
Ramp lowered (see your -10)
Repair of the M577A2 battery box is limit-
ed to replacement of the channel divider
and battery box cover rubber bumpers.
The steps below are for all other carriers
except those indicated by the task title.
Remove four lock nuts (1), washers (2),
screws (3), and two latches (4) from side of
battery box (5). Discard locknuts.
Remove two screws 16), washers (71, arid
channel divider (8) from battery frame (9).
Remove four screws (10), eight washers (1 1),
and battery frame (9) from battery box (5).
rernove four resilient mounts (12) from
Remove three locknuts (13), washers (14).
If necessary, remove rubber bumpers (18)
from battery box (5). discard locknuts