TM 9-2350-247-34
REPAIR WINCH DRUM (M548A1) Continued
0042 00
REMOVAL
1.
Remove lock nut (1) from tie rod (2) on endframe housing (3). Discard lock nut.
2.
Remove endframe housing (3) from drum shaft (4).
3.
Remove two sliding clutch keys (5) securing drum (6) on drum shaft (4).
4.
Remove drum (6) and thrust ring (7) from drum shaft (4).
5.
Press oil seal (8) and two sleeve bearings (9) from drum (6). Discard oil seal and sleeve bearings.
0042 00-2