REPLACE T150 TRACK SHOE ASSEMBLY -- Continued
Position track shoes at a slight angle to mount end connectors on both pins.
Install track shoe (1) on track. Have helper assist.
Install two track pin alignment tools (4) over track shoe pins (5).
Install four end connectors (2) on track shoe pins (5). Remove track pin alignment tool (4) before driving end
connectors flush with pin ends.
Drive end connectors (2) flush with pin ends and install bolts (3) on each end connector.
Join track (see your -10).
TIGHTEN FOUR BOLTS (3) TO 400-430 LB-FT (543-583 NM) TORQUE. Use torque wrench.
Adjust track tension (see your -10).
Unblock vehicle (see your -10).
Road test vehicle to check that track is installed correctly (WP 0128 00).
END OF TASK