TM 9-2350-247-20-2
REPLACE T150 TRACK -- Continued
0358 01
2.
Remove non-mating end connectors (2) from each track shoe assembly (1).
3.
Position track shoe assemblies (1) so that connecting track shoes are approximately 2 inches off the ground.
4.
Connect track shoe assemblies (1).
a.
Install two track pin alignment tools (4) over track shoe pins (5).
b.
Install two end connectors (2) on track shoe pins (5). Remove track pin alignment tool (4) before driving end
connectors flush with pin ends.
c.
Drive end connectors (2) flush with pin ends and install bolts (3) on each end connector.
5.
Repeat Step 4 until a complete track has been connected in a line.
6.
Unblock vehicle (see your -10).
7.
(H): Drive vehicle forward until track (4) positions on sprockets (5).
8.
(H): Drive vehicle forward until track (4) is over idler wheels (6).
9.
Join track (see your -10).
0358 01-2
Change 1