|
| |
TM 9-2350-287-34
3-5. ENGINE MOUNT REPAIR (continued).
b.
1.
2.
3.
4.
5.
c.
d.
1.
2.
3.
4.
5.
DISASSEMBLY
Remove four cotter pins (13) and two pins (12) from engine mount base (14). Discard cotter pins.
Remove jaw assembly (9) from mount base (14).
Turn engine mounting jaw (15) counterclockwise to remove from tie rod (8).
Turn engine mounting jaw (10) clockwise to remove from tie rod (8).
Slide two jaw nuts (11 and 16) out of two jaws (10 and 15).
INSPECTION
Inspect mount base, jaws, bolt, and jaw nuts for cracks and damaged threads.
ASSEMBLY
Slide two jaw nuts (11 and 16) into two jaws (10 and 15).
NOTE
Make sure jaws are evenly spaced on bolt during installation.
Install jaw (10) on tie rod (8) by turning counterclockwise.
Install jaw (15) on tie rod (8) by turning clockwise.
Install jaw assembly (9) on mount base (14),
Install two pins (12) and four new cotter pins (13) on mount base (14)
3-11
|
