|
| |
TM 9-2350-287-34
10-2. BILGE PUMP REPAIR (continued).
10.
11.
12.
13.
14.
15.
16.
17.
18.
.
19.
Match mark endbell (28) with bilge pump (7).
Remove four nuts (22), Iockwashers (23), washers (24), and gaskets (25) from four studs (26). Discard
Iockwashers and gaskets.
Remove endbell (28), motor armature (30), gasket (31), and four glass sleeves (27) and studs (26) from bilge
pump (7)
Remove
.
four studs (26) from endbell (28).
Remove armature (30) from endbell (28).
Remove key (29) from armature (30).
Match mark endbell (32) with motor stator (36).
Remove eight screws (34) and washers (35) from motor stator (36).
Remove screw (39) and Iockwasher (38) to release wire (37) from motor stator (36) to inside of endbell (32).
Discard Iockwasher.
Remove motor stator (36) and gasket (33) from endbell (32).
10-3
|
