|
| |
TM 9-2350-287-34
9-2. UPPER REAR DOOR SMALL DOORS AND HINGE REPLACEMENT (continued).
WARNING
Wear chip-guarding and personal protective equipment (goggles/shield, gloves, etc.)
when using grinder. Failure to heed this warning may result in severe injury to
personnel.
CAUTION
Be careful not to damage upper rear door when grinding loose hinge.
NOTE
Perform step 8 only if hinge halves are damaged.
8.
Grind weld loose to remove four hinge halves (3) from upper rear door (2) and each of two upper rear door small
doors (11 and 14).
b.
INSTALLATION
NOTE
Perform steps 1 through 5 only if hinge halves were removed.
1.
Assemble four hinge halves (3) with two hinge pins (1), washers (8), and new cotter pins (9).
9-3
|
