|
| |
TM 9-2350-287-34
6-4. CARGO COMPARTMENT WIRING HARNESS (12330252) REPLACEMENT.
This Task Covers:
a. Removal
initial Setup:
Tools/Test Equipment:
• General mechanic’s tool kit (Item 19,
Appendix D)
Materials/Parts:
• Lockwasher (2) (Item 46, Appendix H)
• Lockwasher (77) (item 58, Appendix H)
• Lockwasher (8) (Item 67, Appendix H)
Equipment Conditions:
l Vehicle parked on level ground (refer to
TM 9-2350-287-10).
l Battery ground cables disconnected
(refer to TM 9-2350-287-20-1).
b. Installation
• Driver's instrument panel removed (refer to
TM 9-2350-287-20-1).
l Driver’s station M3 air electric heater removed
(refer to TM 9-2350-287-20-2).
l Engine AFES cylinder brackets removed (refer to
TM 9-2350-287-20-2).
• Right side canister restraint bars removed (refer to
To TM 9-2350-287-20-2).
l Right side stowage net removed (refer to
TM 9-2350-287-20-2).
l Left front canister restraints removed (refer to
TM 9-2350-287-20-2).
l APU control box removed (refer to
TM 9-2350-287-20-1).
a.
REMOVAL
1.
Remove two screws (7), Iockwashers (6), and washers (5) securing bottom of two straps (4) and wiring
harness 12330252 (3) to wall of driver's compartment. Discard Iockwashers.
2.
Disconnect wiring harness 12330252 electrical connector (1) from bottom terminal (2) on driver’s compartment
wall.
6-14
|
