|
| |
TM 9-2350-287-20-2
12-2. STEERING CONTROL LINKAGE REPLACEMENT (continued).
8.
9.
10.
b.
1.
2.
Remove quick-release pin (20) from steering control lever (26).
Remove rod (16), with dust boot (27) and clamp (28), from steering control lever (26).
NOTE
Perform step 10 only if steering control lever is damaged or requires replacement.
Remove retaining ring (25) and steering control lever (26) from transmission shaft. Discard retaining ring.
DISASSEMBLY
Remove cotter pin (32), washer (31 ), pin (29), and steering wheel (30) front shaft (13). Discard cotter pin.
Remove sleeve (33), spring (34), and washer (35) from shaft (13).
12-3
|
