|
| |
TM 9-2350-287-20-2
12-2. STEERING CONTROL LINKAGE REPLACEMENT (continued).
a.
1.
2.
3.
4.
5.
6.
7.
REMOVAL
Remove two cotter pins (5), washers (6),
and pins (2) and rod (3) from two levers (1
and 4). Discard cotter pins.
Remove four screws (7) and Iockwashers
(15) from bracket (14) . Discard
Iockwashers.
Remove four screws (10), Iockwashers (9),
and washers (8) from bracket (11). Discard
Iockwashers.
Remove steering shaft (13), with two
brackets (11 and 14) and spacer (12), from
driver’s compartment.
Remove quick-release pin (20) from lever
(21) and rod (16).
Remove two screws (19) and Iockwashers
(18) and cover plate (17) from driver’s
bulkhead. Discard Iockwashers.
Remove three screws (22) and Iockwashers
(23) and housing bracket (24) from
bulkhead. Discard Iockwashers.
12-2
-.
|
