| |
TM 9-2350-287-20-2
11-14. TRACK REPLACEMENT (continued).
5.
6.
7.
8.
9.
10.
Install end connector puller (5) on end connector (3).
Tighten two screws (7) against ends of two track link pins (6) until end connector (3) moves outward
approximately 1 inch (25.4 mm).
Install two track connecting fixtures (9) to two track link pins (6) on opposite sides of track (8).
Remove end connector (3) and end connector puller (5) with two screws (7) from opposite sides of track (8).
WARNING
Before removing track connecting fixtures, support weight of track with crowbar to
lower track to ground.
Remove two track connecting fixtures (9) from four track link pins (6).
With assistant, lower track (8) to ground.
11-33
|