| |
TM 9-2350-287-20-2
19-3. STE/ICE FUEL PRESSURE TRANSDUCER AND DIFFERENTIAL SWITCH REPLACEMENT (continued).
b.
INSTALLATION
NOTE
· Apply Teflon pipe sealant to all male threads before installation.
· Remove all caps and plugs blocking fuel lines and hoses.
1.
Install differential switch (6) on elbow (8).
2.
Install elbow (8) and differential switch (6) on fuel filter (9).
3.
Install elbow (5) on differential switch (6).
4.
Install tube (3) on elbow (5) and tee (1) by tightening nut (2) at tee (1) and tightening nut (4) at elbow (5).
5.
Connect wiring harness connector (7) to differential switch (6).
6.
Install elbow (10) on fuel filter (9).
7.
Install fuel pressure transducer (11) on elbow (10).
8.
Connect wiring harness connector (12) to fuel pressure transducer (11).
FOLLOW-ON MAINTENANCE:
Close transmission access doors (refer to TM 9-2350-287-10).
Connect battery ground cables (para 7-42).
19-5
|