|
| |
TM 9-2350-287-20-2
11-9. IDLER ARM HOUSING REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanic's tool kit
Vehicle parked on level ground (refer to
(Item 24, Appendix I)
TM 9-2350-287-10).
Torque wrench, 0-600 ft-lb
Idler arm assembly removed (para 11-8).
(Item 70, Appendix I)
a.
REMOVAL
NOTE
Replacement of left-side and right-side idler arm housings is the same. Left side is
shown.
Remove eight screws (1) and idler arm housing (2) from hull.
b.
INSTALLATION
Install idler arm housing (2) on
hull with eight screws (1).
Torque screws to 385 ft-lb (522
N
m).
FOLLOW-ON MAINTENANCE:
Install idler arm assembly (para 11-8).
Change 1 11-22
|
