|
| |
TM 8-2350-287-20-2
18-10. APU AIR CLEANER, INLET AND OUTLET HOSES, AND TUBES REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic’s tool kit (Item 24,
• Vehicle parked on level ground (refer to
Appendix I)
TM 9-2350-287-10).
• APU air cleaner filter removed (refer to
Materials/Parts:
TM 9-2350-287-10).
• Sealing compound (Item 59, Appendix D)
• APU plenum removed (para 18-17).
a.
REMOVAL
1.
Remove two hose clamps (10) and hose (9) from APU air cleaner (11).
2.
Loosen four clamps (2 and 7) and remove tube (4), two hoses (3 and 8), and four clamps (2 and 7) from the
APU.
3.
Loosen clamp (1) and remove air cleaner (11) from bracket (6).
4.
Remove two screws (5) and bracket (6) from APU.
18-23
|
