|
| |
TM 9-2350-287-20-2
17-31. HYDRAULIC FILTER AND FILLER CAP REPLACEMENT (continued).
b.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
INSTALLATION
NOTE
l If replacing fitter element only, perform
steps 14 through 16 only.
- -
l Apply Teflon pipe sealant to all
pipe threads prior to installation.
Install fitting (26) on plate (19).
male
Install new gasket (27) and filler flange (28) on
plate (19).
Install six screws (16) on plate (1 9). Install cap
(15) on plate (19).
Connect hose (24) to fitting (26) and install two
clamps (25) on hose (24).
Install fitting (22) on flange (21).
Connect hose (24) to fitting (22) and install two
clamps (23) on hose (24).
Install plate (19) on bracket (20).
Install two washers (18) and screws (17) on
plate (19).
Install filter (13) on bracket (4).
Install two washers (7), new Iockwashers (6),
and screws (5) on bracket (4).
Install reducer bushing (3), elbow (2), and tube
(1) on fitter (13).
Install elbow (12) on fitter (13). Connect hose assembly (8) to two elbows (9 and 12).
Install pipe bushing (10) and elbow (9) on hydraulic reservoir access cover (11 ).
Apply light coat of oil to gasket (29) on new filter element (1 4).
Install new fitter element (14) on fluid filter (13) and hand-tighten.
Operate APU (refer to TM 9-2350-282-10), and check fluid filter (1 3) for leaks.
17-106
|
