| |
TM 9-2350-287-20-2
17-31. HYDRAULIC FILTER AND FILLER CAP REPLACEMENT (continued).
8.
9.
10.
11.
12.
13.
14.
Remove two screws (17) and washers (18)
from plate (19).
Remove plate (19) from bracket (20).
Remove two clamps (23) from hose (24)
and pull hose (24) from fitting (22).
Remove fitting (22) from flange (21).
Remove two clamps (25) from hose (24)
and pull hose (24) from fitting (26).
Pull off cap (15) from plate (19) and remove
six screws (16) from plate (19).
Remove filler flange (28) and gasket (27)
from plate (1 9). Discard gasket.
15.
Remove fitting (26) from plate (19).
17-105
|