|
| |
TM 9-2350-287-20-2
11-5. ROADWHEEL HUB REPLACEMENT (continued).
3.
4.
5.
Remove six screws (8) and washers (7) and cap (3) from roadwheel hub (2).
Remove static spring (9) and preformed packing (13) from cap (3). Discard performed packing.
Remove cotter pin (11), nut (10), and washer (12) from roadwheel hub (2). Discard cotter pin.
WARNING
Roadwheel hub is heavy. Use two hands and remove carefully to prevent possible
injury.
6.
Slide roadwheel hub (2) off roadwheel
arm spindle (5).
7.
Remove seal (6) from roadwheel hub (2).
Discard seal.
b.
DISASSEMBLY
1.
Remove two bearing cones (16 and 18)
from roadwheel hub (2).
2.
Remove two bearing cups (15 and 17)
from roadwheel hub (2).
3.
If damaged, remove 10 studs (14) from
roadwheel hub (2).
c.
CLEANING AND INSPECTION
1.
Clean and inspect bearing cones in
accordance with TM 9-214. Replace if
damaged.
11-12
|
