|
| |
TM 9-2350-287-20-2
17-15. IDLER SPROCKET ASSEMBLY REPLACEMENT (continued).
3.
Remove six screws (8), nuts (12), Iockwashers (11), and washers (9), washers (10) and two nuts (13) and
takeup plates (7) from takeup-end section (6). Discard Iockwashers.
6.
7.
Remove spacer (18) from shaft (19).
Remove two screws (17) from hub (16) and sprocket assembly (15).
Drive shaft (19) out of sprocket assembly (15), spacer (14), hub (16), and takeup-end section (6).
Remove spacer (14), key (20), sprocket assembly (15), and hub (19) from take-up-end section (6).
17-37
|
