|
| |
TM 9-2350-287-20-2
10-4. DRIVER’S COMPARTMENT BRAKE ASSEMBLY REPAIR (continued).
5.
Remove three self-locking nuts (40) and washers (39) from support bracket (38). Discard self-locking nuts.
6.
Remove two screws (48) and Iockwashers (47) from parking brake latch (46). Discard Iockwashers.
7.
With chisel, separate top of brake pedal (32) at split and remove latch (46) from support bracket (38), actuator
(27), and brake pedal (32).
8.
Remove two screws (41 ) and Iockwashers (42) and stoplight switch (43) from support bracket (38). Discard
Iockwashers.
9.
Remove 10 screws (37) and self-locking nuts (33) and cover (34) from latch (46). Remove gasket (35) from
bracket (36). Discard self-locking nuts and gasket.
10.
Remove seal (45) from latch (46). Discard seal.
11.
Remove bracket (36) from latch (46).
12.
If damaged, remove two bearings (44) from support bracket (38).
c.
CLEANING AND INSPECTION
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
10-13
WARNING
|
