|
| |
TM 9-2350-287-20-2
10-4. DRIVER’S COMPARTMENT BRAKE ASSEMBLY REPAIR (continued).
b.
DISASSEMBLY
1.
Remove two cotter pins (31) and pin (30) from brake pedal (32). Discard cotter pins.
2.
Remove screw (24), self-locking nut (29), and two washers (25) from brake pedal (32). Discard self-locking
nut.
3.
Loosen two setscrews (28) in actuator (27).
WARNING
Use care when removing retaining rings. Retaining rings are under spring tension and
can act as projectiles when released and cause severe eye injury.
4.
Remove retaining ring (22) and boot (23) from parking brake latch assembly (26). Discard retaining ring and
boot.
10-12
|
