|
| |
TM 9-2350-287-20-2
15-70. RIGHT DUFFLE BAG STOWAGE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
l Lockwasher (24) (Item 177, Appendix H)
l Electric disk sander (Item 15, Appendix 1)
l General mechanic’s tool kit (Item 24,
Personnel Required: Two
Appendix 1)
Equipment Conditions:
Materials/Parts:
l vehicle parked on level ground (refer to
• Cotter pin (4) (Item 18, Appendix H)
TM 9-2350-287-10).
a.
1.
2.
3.
4.
5.
6.
7.
8.
b.
REMOVAL
Unhook and remove net (4) from eight right-side duffle bag stowage eyelets (5) and two bar assemblies (1
and 14).
Fold up shelf assembly (13) to relieve tension on two support chains (1 O).
Remove 16 screws (7) and Iockwashers (6) and eight duffle bag stowage eyelets (5) from vehicle. Discard
Iockwashers.
With the aid of an assistant, remove four cotter pins (12) and pins (11) and shelf assembly (13) from bar
assembly (14). Discard cotter pins.
Remove four screws (3) and Iockwashers (2) and bar assembly (1) from hull. Discard Iockwashers.
Remove four screws (15) and Iockwashers (16) and bar assembly (14) from hull. Discard Iockwashers.
NOTE
Perform steps 7 and 8 only if support chains are damaged.
Grind one peened end of each of four connecting link pins (8).
Remove four connecting link pins (8) and two connecting links (9) and support chains (10) from two duffle bag
stowage eyelets (5) and shelf assembly (13).
INSTALLATION
NOTE
Perform steps 1 and 2 only if two support chains were removed.
1.
Install two support chains (10) and connecting links (9) and four connecting link pins (8) on shelf assembly
(13) and two duffle bag stowage eyelets (5).
15-180
|
