|
| |
TM 8-2350-287-20-2
15-63. COMMANDER’S SEAT REPAIR (continued).
20.
21.
22.
Lightly coat pivot points of seat (16) with grease.
Install seat (16) on manual control lever (30) with shaft (27) and two new washers (26).
Install quick-release pin (28) and chain on manual control lever (30) with screw (29). Insert quick-release
(28) on manual control lever (30).
pin
23.
Lightly coat post (22) with grease.
24.
Press locking handle (17). Install rnanual control lever (30) and seat (16) on post (22). Release locking handle
(17).
25.
Install four shoulder screws (25), washers (19), bearings (20), and nuts (18) on manual control lever (30).
26.
Move seat (16) and manual control lever (30) to highest position on post (22). Install spring (24) on manual
control lever (30) and post bracket (23).
15-163
|
