|
| |
TM 9-2350-287-20-2
15-62. DRIVER’S SEAT REPAIR (continued).
3.
4.
5.
6.
7.
8.
9.
10.
11
12.
Remove Iockpin (24), headed pin (27), S-hook (26), chain (25), and bracket (23) from backrest support (30).
Remove self-locking nut (34), screw (21), two washers (22), and bracket (23) from backrest (19). Discard self-
Iocking nut.
Remove eight screws (20) and backrest cushion (18) from backrest (19).
Remove self-locking nut (31), screw (33), and backrest support (30) from seat back bracket (32). Discard self-
Iocking nut.
Remove adjusting screw (28) and nut (29) from backrest support (30).
Remove four screws (40) and washers (41), two shafts (45), and lower support bracket (51) from seat support
(11).
Remove cotter pin (50), headed pin (49), spring (46), and lift adjusting lever (12) from seat support (11).
Discard cotter pin.
Remove plunger (47) and latch sleeve (48) from seat support (11).
Remove two self-locking nuts (39), washers (38), and self-locking nuts (37), seat back bracket (36), and rear
bracket (42) from driver’s seat (35). Discard self-locking nuts.
Remove self-locking nut (44) and washer (43) from driver’s seat (35). Remove driver’s seat (35) from lower
support bracket (51). Discard self-locking nut.
15-151
|
