|
| |
TM 9-2350-287-20-2
15-60. DRAIN PLUGS AND COVERS REPLACEMENT (continued).
c.
1.
2.
3.
d.
1.
2.
e.
1.
2.
3.
f .
1.
2.
9.
1.
2.
h.
1.
2.
ENGINE OIL DRAIN PLUG REMOVAL
Remove three screws (21) and washers (20), small cover (19), and gasket (18) from underside of vehicle hull
(1). Discard gasket.
Position drain pan under engine oil drain plug (17) to catch fluid.
Remove engine oil drain plug (17) and gasket (16) from engine (15). Allow engine oil to drain. Discard gasket.
ENGINE OIL DRAIN PLUG INSTALLATION
Install engine oil drain plug (17) and new gasket (16) on engine (15).
Install new gasket (18) and small cover (19) on underside of vehicle hull (1) with three screws (21) and washers
(20).
TRANSMISSION OIL DRAIN PLUG REMOVAL
Remove three screws (22) and washers (23), small cover (24), and gasket (25) from underside of vehicle hull
(1). Discard gasket.
Position drain pan under transmission oil drain plug (26) to catch fluid.
Remove transmission oil drain plug (26) from transmission (27) and allow transmission oil to drain.
TRANSMISSION OIL DRAIN PLUG INSTALLATION
Install transmission oil drain plug (26) on transmission (27).
Install new gasket (25) and small cover (24) on bottom of vehicle hull (1) with three screws (22) and washers
(23).
HULL FLOOR DRAIN ACCESS COVER REMOVAL
Remove four screws (14) and washers (13) from hull floor drain access cover (12).
Remove hull floor drain access cover (12) and preformed packing (11) from underside of vehicle hull (1)
directly below steering wheel. Discard preformed packing.
HULL FLOOR DRAIN ACCESS COVER INSTALLATION
Position hull floor drain access cover (12) and new preformed packing (11) in place on bottom of vehicle hull
(1) directly below steering wheel.
Install four screws (14) and washers (13) to secure hull floor drain access cover (12) to vehicle hull (1).
15-146
|
