|
| |
TM 9-2350-287-20-2
15-59. M45 PERISCOPE COVER, DOORS, AND SLEEVE ASSEMBLY REPAIR (continued).
b.
1.
2.
3.
c.
1.
2.
3.
d.
1.
2.
3.
DISASSEMBLY
Remove three pins (13), springs (14), and
doors (16) from cover (1).
Remove three rings (12), pins (11), and
springs (17) from three doors (16).
Remove three gaskets (15) from three
doors (16). Discard gaskets.
ASSEMBLY
Install three new gaskets (15) on three
doors (16).
Install three springs (17), pins (11), and
rings (12) on three doors (16).
Install three doors (16) and springs (14) in
place on cover (1) and secure with three
pins (13). Crimp ends of three pins (13).
INSTALLATION
Install three periscope sleeves (6) on hull
inside driver's compartment, and secure
with six screws (8) and washers (7).
Install six rods (5), supports (10), and wing
nuts (9) in hull from inside driver’s
compartment. Crimp last three threads of
each of six rods (5).
Install new gasket (4) and cover (1) on
outside of hull with six screws (2) and
washers (3).
FOLLOW-ON MAINTENANCE:
• Close driver's hatch cover (refer to
TM 9-2350-287-10).
15-144
|
