|
| |
TM 9-2350-287-20-2
15-58. DRIVER'S HATCH SEAL REPLACEMENT (continued).
b.
INSTALLATION
1.
2.
3.
4.
WARNING
Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open heat and use in a well-
ventilated area. If adhesive gets on skin or clothing, wash immediately with soap and
water.
Apply thin coat of adhesive to hatch seal mounting surface around hatchway opening of hull and mounting
surface of new hatch seal (2). Allow adhesive to dry until tacky.
Aline holes in hatch seal (2) with threaded holes around hatchway opening in hull.
Position hatch seal (2) in place around hatchway opening.
Install six screws (1) in hatch seal (2) and hatchway opening in hull.
FOLLOW-ON MAINTENANCE:
• Close driver's hatch cover (refer to TM 9-2350-287-10).
15-142
|
