|
| |
TM 9-2350-287-20-2
15-55. DRIVER’S HATCH COVER LATCH ASSEMBLY REPAIR (continued).
b.
1.
2.
3.
4.
c.
1.
2.
d.
1.
2.
3.
4.
5.
DISASSEMBLY
Unscrew knob (15) from pin (11).
Remove four screws (14) and Iockwashers (13), cover (16), spring (12), and pin (11) from latch
body (8). Discard Iockwashers.
Remove lubrication fitting (7) from latch body (8).
Remove quick-release pin (10) and chain (9) from latch body (8).
.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic
and flammable.
Always wear
protective goggles and gloves, and
use only in a well-ventilated area.
Avoid contact with skin, eyes, and
clothes, and DO NOT breathe
vapors. DO NOT use near open
flame or excessive heat.
Clean all metal parts with drycleaning solvent and rags.
Inspect all metal parts for cracks, bends, and stripped
threads. Replace any damaged parts.
ASSEMBLY
Install quick-release pin (10) and chain (9) on latch body (8).
Install Iubrication fitting (7) in latch body (8).
Install pin (11) and spring (12) on latch body (8).
WARNING
Sealing compound can burn easily, can give off harmful vapors, and is harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If sealing compound gets on skin or clothing, wash immediately with
soap and water.
Apply sealing compound to threads of four screws (14). Install four screws (14) and new Iockwashers (13)
and cover (16) on pin (11) and latch body (8).
Screw knob (15) on pin (11).
15-138
|
