|
| |
TM 9-2350-287-20-2
15-55. DRIVER’S HATCH COVER LATCH ASSEMBLY REPAIR.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
• General mechanic’s tool kit (Item 24,
Appendix I)
Materials/Parts:
• Drycleaning solvent (Item 28, Appendix D)
• Grease (Item 32, Appendix D)
• Rag (Item 56, Appendix D) (as required)
• Sealing compound (Item 58, Appendix D)
• Lockwasher (4) (Item 154, Appendix H)
• Lockwasher (2) (Item 160, Appendix H)
Personnel Required: Two
Equipment Conditions:
• Vehicle parked on level ground (refer to
TM 9-2350-287-10).
• Driver's hatch cover opened and secured
(refer to TM 9-2350-287-10).
a.
REMOVAL
1.
While assistant holds driver’s hatch cover (1) in vertical position, remove two screws (5), Iockwashers (4), and
washers (3) and latch assembly (2) from vehicle deck (6). Discard Iockwashers.
2.
Lower driver's hatch cover (1).
15-135
|
