|
| |
TM 9-2350-287-20-2
15-37. APU COMPARTMENT LOUVERED FRONT DOOR REPAIR.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e.
Installation
Initial Setup:
Tools/Test Equipment:
• Lockwasher (4) (Item 196, Appendix H)
• General mechanic’s toolkit (Item 24,
Appendix 1)
Personnel Required: Two
Materials/Parts:
Equipment Conditions:
• Drycleaning solvent (Item 28, Appendix D)
• Vehicle parked on level ground (refer to
• Grease (Item 32, Appendix D)
TM 9-2350-287-10).
• Rag (Item 56, Appendix D)
• APU compartment louvered front door
• Cotter pin (Item 17, Appendix H)
opened (refer to TM 9-2350-287-10).
• Cotter pin (2) (Item 23, Appendix H)
a.
1.
2.
3.
4.
5.
b.
1.
2.
15-90
REMOVAL
NOTE
An assistant is needed when removing or installing APU compartment louvered front
door.
While assistant supports APU compartment louvered front door (22), remove cotter pin(11), headed pin (10),
and washer (21 ) from each of two hull-mounted brackets (20) and louvered front door (22). Discard cotter
pins.
Remove louvered front door (22) and two bronze bearing washers (19) from two hull-mounted brackets (20).
Remove bottom panel (18) and left panel (17) from fasteners on APU compartment wall.
Remove two screws (14), Iockwashers (15), washers (16), and angle (13) from APU compartment wall.
Discard Iockwashers.
NOTE
For proper installation, record the number and thickness of shims.
Remove two screws (4), Iockwashers (3), striker (2), and shims (1) from inside APU compartment. Discard
Iockwashers.
DISASSEMBLY
Remove spring (9) and spring hook (8) from latch (5).
Remove cotter pin (24), slotted nut (7), washer (6), latch (5), and handle (23) from louvered front door (22).
Discard cotter pin.
|
