|
| |
TM 9-2350-287-20-2
15-29. CANISTER DOORS AND PERSONNEL SIDE DOOR LATCHES AND BUMPER
ASSEMBLIES REPAIR (continued).
3.
Hold pin (12), and install ball (7) on pin (12).
4.
Install bumper (4) in bumper assembly (2) with straight pin (1) and new cotter pin (3).
e.
INSTALLATION
1
Install shims (18) and bumper assembly (2) on hull with two screws (6) and new lockwashers (5).
2.
Install shims (17) and latch assembly (16) on hull with four screws (15) and new Iockwashers (14).
NOTE
Step 3 applies to personnel side door only.
3.
Open personnel side door (refer to TM 9-2350-287-10). Make sure that bumper assembly (2) allows door to
latch securely in latch assembly (1 6). Add or remove shims (17 or 18) as necessary. Close personnel side
door (refer to TM 9-2350-287-10).
FOLLOW-ON MAINTENANCE:
• None
15-68
|
