|
| |
15-22. TOP MIDDLE DOOR REPAIR (continued).
12.
13.
b.
1.
2.
3.
4.
5.
6.
7.
c.
1.
2.
3.
d.
1.
Remove eight screws (28), 16 washers (13), eight Iockwashers (12), nuts (11), and two hinge arms (6) from
door (9). Discard Iockwashers.
Remove sling and hoist from lifting lug (10).
DISASSEMBLY
Remove 10 screws (54) and Iockwashers (51) and two seal retainers (53 and 56) and two outer seals (55) from
door (9). Discard Iockwashers and seals.
Remove eight screws (52) and Iockwashers (51) and two seal retainers (50) and seals (49) from door (9).
Discard Iockwashers and seals.
Remove two seals (29 and 28) from door (9). Discard seals.
Remove setf-locking nut (48), washer (47), screw (44), and door latch (43) from each of two brackets (45).
Discard self-locking nuts.
NOTE
For proper installation, note number of washers removed with handle.
Remove self-locking nut (34) and screw (36), handle (35), Iockwasher (41), three washers (42), and pin (46)
from each of two door latches (43). Discard Iockwashers and self-locking nuts.
Remove three screws (37), kxkwashers (38), and washers (39) and bracket (40) from top middle door (9).
Discard Iockwashers.
Remove four screws (32), Iockwashers (31), and washers (30) and bracket (33) from top middle door (9).
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D480 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT use near open flame or excessive heat.
Clean all metal parts with drycleaning solvent and wipe with clean rags.
Remove all adhesive residue from channels in top middle door.
Inspect all parts for cracks, bends, stripped threads, or other damage. Replace unserviceable parts.
ASSEMBLY
Install bracket (33) on top middle door (9) with four washers (30), new Iockwashers (31), and screws (32).
15-48
TM 9-2350-287-20-2
|
