PREVENTIVE MAINTENANCE CHECKS AND SERVICES - cont

PREVENTIVE MAINTENANCE CHECKS AND SERVICES - cont - TM-9-2350-287-20-1_72

PREVENTIVE MAINTENANCE CHECKS AND SERVICES - cont - TM-9-2350-287-20-1_74

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
51

TM 9-2350-287-20-1 ITEM NO. 8 9 10 TABLE 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) FOR M992A1 S=SEMIANNUAL A=ANNUAL INTERVAL S s A ITEM TO BE INSPECTED FINAL DRIVE UNIVERSAL JOINTS APU CHAINCASE DRAIN BUMP STOP BRACKETS PROCEDURE a. Check for missing or broken Iockwires (11) on mounting bolts (1 2). b. If missing or broken, tighten mounting bolts (12) to 90 ft-lb, then install Iockwires. WARNING APU engine is hot after operation. Use caution when reaching into APU compartment. a. Open side APU access door (refer to TM 9-2350-287-10). b. Drain and refill APU chaincase (Appendix G). a. Check for loose mounting bolts (13) on bump stops (14) with wrench. b. If loose, tighten mounting bolts (13) between 300 and 350 ft-lb (405 and 475 N•m). NOT FULLY MISSION CAPABLE IF a. Any loose, missing, or broken Iockwire or mounting bolts. 2-21

Privacy Statement
Press Release
Contact