TM 9-2350-287-20-1
4-19. SECONDARY FUEL FILTER ASSEMBLY LlFTING BRACKET REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic’s tool kit
• Vehicle parked on level ground (refer to
(Item 24, Appendix I)
TM 9-2350-287-10).
• Left and right transmission access doors opened
Materials/Parts:
(refer to TM 9-2350-287-10).
• Lockwasher (3) (Item 159, Appendix H)
• Lockwasher (2) (Item 164, Appendix H)
a.
1.
2.
b.
1.
2.
REMOVAL
NOTE
It is not necessary to disconnect fuel lines or drain fuel filter.
Remove two screws (1), nuts (5), lockwashers (4), and washers (3) securing secondary fuel filter (6) to lifting
bracket (2). Discard lockwashers.
Remove three screws (7) and Iockwashers (8), surge tank tube retaining strap (9), and lifting bracket (2) from
transmission (10). Discard Iockwashers.
.
INSTALLATION
Install lifting bracket (2) and surge
tank tube retaining strap (9) on
transmission (10) with three screws
(7) and new lockwashers (8).
Secure secondary fuel filter (6) to
lifting bracket (2) with two screws (1),
washers (3), new lockwashers (4),
and nuts (5).
FOLLOW-ON MAINTENANCE:
• Close left and right transmission access
doors (refer to TM 9-2350-287-10).
4-57
