2-32. PREPARATION FOR ADMINISTRATIVE STORAGE (continued)

2-31. DEFINITION OF ADMINISTRATIVE STORAGE.

2-33. CARE OF EQUIPMENT IN ADMINISTRATIVE STORAGE.

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
469

TM 9-2350-287-20-1 2-32. PREPARATION FOR ADMINISTRATIVE STORAGE (continued). Establish a fire plan and provide adequate firefighting equipment and personnel. Maintenance Services and Inspections Prior to storage, perform the next scheduled major preventive maintenance services (semi-annually or annually). Basic Issue Items Process basic issue items simultaneously with the M992A1 to which they are assigned. if possible, store basic issue items with the M992A1. if stored apart from the M992A1, basic issue items with tags designating the vehicle, its registration or serial number, and location, and store in protective closures. In addition, place a tag or list indicating the location of the removed items in a conspicuous place in the M992A1. Corrections of Shortcomings and Deficiencies Correct all shortcomings and deficiencies prior to storage, or obtain a deferment from the approving authority. Lubrication Lubricate equipment in accordance with the applicable lubrication instructions in TM 9-2350-287-10 and Appendix G. Retract hydraulic system linkages and coat exposed portions of shafts with grease. General Cleaning, Painting, and Preservation Clean the equipment of dirt, grease, and other contaminants in accordance with this manual. CAUTION Do not direct high-pressure water or steam against air cleaners, air duct outlets, exhaust outlets, unsealed electrical systems, automatic fire extinguishing system (AFES) equipment, or any exterior component. Moisture will cause electrical malfunctions. Condensation in ducts can cause corrosion. After cleaning and drying, immediately coat all unpainted metal surfaces with oil or grease as appropriate. NOTE Air circulation under draped covers reduces deterioration from moisture and heat. Place a piece of cloth or other material between desiccant bags and metal surfaces. Sunlight, heat, humidity, and dirt tend to accelerate deterioration. Install all covers (including vehicle protection closures) authorized for the equipment. Close and secure all openings except those required for venting and draining. Seal openings to prevent the entry of rain, snow, or dust. Insert desiccant when complete seal is required. Place equipment and provide blocking or framing to allow for ventilation and water drainage. Support cover away from M992A1 surfaces which may rust, rot, or mildew. 2-440

Privacy Statement
Press Release
Contact