T M 9 - 2 3 5 0 - 2 8 7 - 1 0
TROUBLESHOOTING (Main Engine) (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
ENGINE HAS LOW OR NO OIL PRESSURE
Step 1. Check to see if oil level is low.
If low, fill engine (Appendix E).
Step 2. Check engine compartment for evidence of oil leaks.
If leaks are evident, notify Unit maintenance.
TRANSMISSION
7.
TRANSMISSION DOES NOT DRIVE IN ANY RANGE
Step 1. Check for bent, broken, damaged, or missing transmission selector lever
linkage.
If linkage is bent, broken, damaged, or missing, notify Unit maintenance.
Step 2. Check oil level.
If low, fill transmission (Appendix E).
Step 3. Check for disconnected or broken universal joints.
If disconnected or broken, notify Unit maintenance.
STEERING
8 . VEHICLE IS DIFFICULT TO STEER
Step 1. Check steering linkage for binding or foreign material.
If binding is caused by foreign material, remove foreign material.
Step 2. Check for broken, bent, or missing linkage components.
If linkage components are bent, broken, or missing, notify Unit maintenance.
Step 3. Check condition of steering linkage bushing in drives compartment bulkhead
for signs of damage or deterioration.
If bushing is damaged or deteriorated, notify Unit maintenance.
Change 1
3 - 7