TM 9-2350-287-10
TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
• Forcorrective actions of malfunctions not listed in this table, notify
Unit maintenance.
• Wherever the word “lubricate” appears, see Appendix E.
• Malfunctions, tests or inspections, and corrective actions are
listed/indented according to the heading at the top of each page.
MAIN ENGINE
1.
ENGINE FAILS TO CRANK, OR CRANKS SLOWLY, WHEN STARTER SWITCH IS
ACTIVATED
Step 1. Check to see if MASTER switch is set to ON.
If not on, move switch to ON.
Step 2. Check to see if transmission lever is in neutral (N).
If not in N, place lever in N.
Step 3. Check to see if battery cables are loose, broken, or corroded.
If loose, broken, or corroded, notify Unit maintenance.
Step 4. Check to see if BATTERY-GENERATOR indicator gage reads in normal
range.
If indicator gage reads low, notify Unit maintenance.
2.
ENGINE CRANKS BUT FAILS TO START
Step 1. Check to see if FUEL gage indicates empty (E).
If no fuel, fill tank.
Step 2. Check to see if FUEL SHUT OFF control handle is pulled out.
If pulled out, push handle in completely.
3-4
