TM 9-2350-287-10
COMMANDER’S SEAT (continued)
WARNING
To avoid injury, use two people to lift seat assembly for stowage.
CAUTION
If commander’s cupola periscope is to remain installed, you must rotate cupola so
that periscope is 900 left of forward before you raise seat assembly. Failure to do
this may result In destruction of periscope. If periscope is removed, cupola may
remain forward when seat is stowed.
NOTE
Have an assistant help lift and
support seat and prevent footrest
from swinging.
6.
Remove two quick-release pins (9 and
13) from bracket (10) and support bracket
(14). Pivot seat (1) forward and upward
until holes in seat post (1 1) align, and
insert quick-release pin (13) in support
bracket (14). Install quick-release pin (9)
in bracket (10).
7.
Pivot footrest (6) toward rear and up.
Align pinholes in footrest (6) and install
quick-release pin (12) in footrest (6).
2-114
