TM 9-2350-287-10
COMMANDER’S SEAT (continued)
2.
Footrest Adjustment. Remove quick-release pin
(4) from footrest (5). Slide footrest (5) in or out
to desired position. Align holes in footrest (5) and
install quick-release pin (4) in footrest (5).
WARNING
To avoid injury, sit on seat to apply
downward pressure before adjusting
height-adjusting handle.
CAUTION
Do not use handle guard for lifting; it
Is
meant
to
prevent
accidental
actuation of the handle.
3.
Seat Height Adjustment. Apply downward
pressure to seat (3) and pull adjusting handle (6)
forward. Increase or decrease pressure on
handle (6) to lower or raise seat (3). When
desired height is achieved, release handle (6)
and slowly release pressure until seat (3) locks
into position.
2-111
