TM 92350-287-10
OPERATION OF DRIVING LIGHTS AND DOME LIGHTS
Operation of Dome Light
1. To set blue-green light to ON, turn switch lever (1)
fully clockwise.
2. To set white light to ON, press safety latch (2) and
turn switch lever (1) counterclockwise past stop.
3. To set both lights to OFF, position switch lever (1) in
center position.
Operation of Light Switch Assembly
The following panels show which lamps are turned on by different positions of main light switch.
1. Push up safety switch (2) to release main light switch
(1).Release safety switch after main light switch is
properly positioned.
2. Push up on instrument panel light switch (3) to turn on
instrument panel lights.
2-91