TM 9-2350-277-34
REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE — Continued
0115 00
NOTE
Use two of the screws removed in Step 8 as jacking screws to remove cover plate.
8.
Remove six screws (9) and washers (10) from cover plate (11). Install two jacking screws in threaded holes of cover
plate.
9.
Remove cover plate (2) and preformed packing (5) from rear housing (4). Discard preformed packing. Remove two
jacking screws (6) from cover plate.
10. Press encased oil seal (1) out of cover plate (2). Discard oil seal.
0115 00-3
