TM 9-2350-277-34
REPAIR FAN AND GENERATOR VARIABLE SPEED DRIVE — Continued
0115 00
3.
Install three jacking screws (5) in generator pulley (6).
4.
Using three jacking screws (1), separate generator pulley (2) from fan pulley (3). Remove preformed packing (4) and key
(5). Discard preformed packing.
5.
Secure fan pulley (3) in holding fixture.
6.
Remove six screws (6) and washers (7) from fan pulley (3). Separate fan pulley from inner housing assembly (8).
7.
Reverse housing assembly (8) in holding fixture.
0115 00-2
