TM 9-2350-277-34
REPAIR STE/ICE DISTRIBUTION BOX Continued
0109 00
10. Install cap (8) on connector J2 (9).
11. Secure chain (7) with screw (5) and new locknut (6).
12. If required, cement gasket (4) to junction box. Apply a thin even coat of adhesive to both surfaces. Allow to dry until
tacky. Press surfaces together firmly.
13. Position cover (3) on gasket (4) and secure with ten washers (2) and screws (1).
FOLLOW-THROUGH STEPS
1.
Install STE/ICE distribution box (see your -20).
END OF TASK
0109 00-6