TM 9-2350-277-34
INSTALL PERSONNEL HEATER KIT (M113A3, M1059A3, AND M58 ONLY) — Continued
0072 00
38. Remove locknut (1) and screw (2) from crossmember. Discard locknut and screw.
NOTE
Remove both nuts, sleeves and locknut prior to installing nipple through crossmember.
39. Install nipple body (3) through crossmember and secure with locknut (4).
40. Install nut (5) and sleeve (6) on hose end (7).
41. Secure personnel heater fuel hose (7) to nipple body (3).
42. Remove eight screws (8) from eight weldnuts (9).
43. Secure personnel heater fuel hose (7) to eight weldnuts (9) with eight screws (8) and clamps (10).
0072 00-9
