TM 9-2350-277-34
REPAIR ENGINE AND TRANSMISSION STAND Continued
0070 00
REPLACE JACK SCREW
1.
Retract jack screw (11). Dowel pin behind bracket bushing should be horizontal and keyway in end of hand wheel tube
pointing up.
2.
Drive out pin (13). Discard pin.
3.
Remove hand wheel (14) and tube (15). Be careful not to lose key (16).
NOTE
If hand wheel or tube requires replacement, go to Step 4, if not, go to Step 7.
4.
Remove handle (1) from hand wheel (2).
5.
Drive out pin (3) from hand wheel (2). Discard pin.
6.
Install hand wheel (2) on tube (4). Align dowel holes and install new pin (3).
0070 00-7