INSTALLATION - TM-9-2350-277-34

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA. - TM-9-2350-277-34_304

REPAIR TRACK TENSION ADJUSTER Continued - TM-9-2350-277-34_306

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
257

TM 9-2350-277-34 REPAIR TRACK TENSION ADJUSTER — Continued 0037 00 INSTALLATION 1. Press new sleeve bearing (14) in piston (3) from side opposite lubrication fitting (9). Use arbor press. 2. Press new sleeve bearing (15) in plunger (2). Use arbor press. NOTE Packings, bearings, and retaining rings are part of repair kit P/N 5703829. 3. Install five new packings (13), new bearing (12), and new retaining ring (11) on piston assembly (10). 4. Apply a light coat of engine oil to piston assembly (10) and to inside of piston (3). 0037 00-5

Privacy Statement
Press Release
Contact