TM 9-2350-277-34
REPAIR TRACK TENSION ADJUSTER — Continued
0037 00
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
INSPECT AND REPAIR
1.
Check threads of plunger (2) and piston (3). Chase damaged threads with a die. Replace parts as a matched set if the
threads of either part are stripped or worn.
2.
Check machined surfaces of piston (3) and plunger (2). Remove grooves and scratches. Replace parts that have deep
grooves and scratches or are worn.
3.
Check parts shown in table on page 0037 00–7 that have reference letters.
4.
Check the parts dimensions with table on page 0037 00–7 to determine replacement.
0037 00-4
