TM 9-2350-277-34
REPLACE TRANSMISSION Continued
0035 00
26. Connect circuit 34 lead (4) to engine oil low pressure switch (5).
27. Connect transmission inlet hose (1) to elbow (2).
28. Secure inlet hose (10) to bracket (5) with clamp (4), screw (1), two washers (2), and new locknut (3). TIGHTEN
SCREW TO 27-32 LB-FT (36-44 N m) TORQUE.
FOLLOW-THROUGH STEPS
1.
Install ramp hydraulic pump (see your -20).
2.
Install dipstick and filler tube (see your -20).
3.
Install transmission oil sampling valve (see your -20).
4.
Replace transmission oil (see your -20).
END OF TASK
0035 00-18